sparky_jones
10-01 08:22 PM
Yes, being able to produce a complete file with all the paperwork is a pre-requisite for self-represenation. However, if and when you decide to "pull out your G-28", how will you go about making sure that USCIS updates their records to ensure no further correspondence is sent to the attorney? Are you aware of a standard procedure to do that?
Thanks!
I already pllued all of my paperwork from attorney.
You must have at least a copy of all your filing paperwork from Labor Filing till today. This is required when you are filing anything new or responding any RFE, you sould match each and everything on the USCIS records when you are submitting any new paper work as a part of RFE/new application etc.
So, better have a copy of all paprework before..
I dont intend to change my employer/lawyer but just got all original approvals and copy of each and every paperwork from my attorney till date about my GC.. just to be safe..
I can pull out my G28 and be on my own at any time, but still save my ongoing pending petitions..
Thanks!
I already pllued all of my paperwork from attorney.
You must have at least a copy of all your filing paperwork from Labor Filing till today. This is required when you are filing anything new or responding any RFE, you sould match each and everything on the USCIS records when you are submitting any new paper work as a part of RFE/new application etc.
So, better have a copy of all paprework before..
I dont intend to change my employer/lawyer but just got all original approvals and copy of each and every paperwork from my attorney till date about my GC.. just to be safe..
I can pull out my G28 and be on my own at any time, but still save my ongoing pending petitions..
wallpaper They make him look manly and
softa
June 1st, 2006, 04:56 PM
Thanks, your reply really helped me understand a few things. First of all, for the money I can spend there isn't much of a choice (meaning what I already picked is fine for the money spent), then, even more important fact I realized is that the equipment I can afford for now, can be a starting point in my photography experience. It is more important that I use it, take photos and practice than to own expensive gear and never really use it. In the end I hope that one day in the future when I gain the needed skill I'll be able to afford a better and a more advanced equipment. So, once again, thanks a lot.
satyachowdary
03-09 07:44 PM
Hi
Can some one suggest a good lawyer in NJ/NY areas to handle my AC-21 case.
Can some one suggest a good lawyer in NJ/NY areas to handle my AC-21 case.
2011 shows off his manly tattoo
arikris
02-08 11:22 PM
@sduddukuri - Can you share why H4 was denied in the first place? I am in a similar situation and wondering if MTR or Travel abroad would be better.
more...
immigration
03-12 09:22 AM
MN. You can call and tell them that you are using ITIN and will update with SSN when you have one.
needhelp!
09-22 04:07 PM
I agree.. lets project all the positive (sound) vibes into the lawmaker offices.
What are you waiting for?
PICK UP THE PHONE AND CALL NOW!
What are you waiting for?
PICK UP THE PHONE AND CALL NOW!
more...
fromnaija
10-01 06:27 PM
If you did ask for a fee waiver could you check that you entered the right receipt number? This could be someone else's case as I don't think you would qualify for a fee waiver.
Anybody ..any replies ??
Anybody ..any replies ??
2010 Cosmetic Tattooing
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
gc@waiting
07-21 06:27 AM
Does anyone have any experience with the name variations (the same old LNU/FNU stuff) leading to I485 rejection? I have the following names used in various combinations on multiple visa stampings (B, L1, H1B, H1B,H1B....).
FNU FirstName
FirstName LNU
FirstName LastName(as in birth certificate)
LNU FirstName
My Birth certificate has the complete "firstname lastname", while the degree certificate/credentials only have the first name, the most recent I94 & 797 have the name similar to the birth certicate (SSN has FirstName LNU). I485 applied under the birth certificate name with an AFFIDAVIT as advised by my attorney explaining the confusion about the name.
A greatly appreciate anyone shedding some light on this, thanks in advance.
FNU FirstName
FirstName LNU
FirstName LastName(as in birth certificate)
LNU FirstName
My Birth certificate has the complete "firstname lastname", while the degree certificate/credentials only have the first name, the most recent I94 & 797 have the name similar to the birth certicate (SSN has FirstName LNU). I485 applied under the birth certificate name with an AFFIDAVIT as advised by my attorney explaining the confusion about the name.
A greatly appreciate anyone shedding some light on this, thanks in advance.
hair Cyrus Tattoo Celebrity Barely
manderson
12-29 07:56 PM
have you tried filing a FOIA (freedom of information act) request to obtain the 140? i don't know how well u have researched this, but u should talk to a good lawyer.
Getting I-140 approval copy is not possible.
I only have case number prinout.
anyways, it is not a big deal. Worst case, I will get 1 year extension.
It is not going to deter me from exercising AC-21.
Getting I-140 approval copy is not possible.
I only have case number prinout.
anyways, it is not a big deal. Worst case, I will get 1 year extension.
It is not going to deter me from exercising AC-21.
more...
tonyHK12
11-07 10:00 AM
Guys the person who wrote this article is a Democratic political consultant - in short political propaganda.
I would like to hear views from someone who is neutral.
If I recall Birthright citizenship was only being opposed for those who were not legally in the US. But as someone said this will be a very tough change to achieve anyway.
I am all for both parties working together, doing what is better for the country, rather than passing Bills in 1 week that no one knows the contents of.
I really want to see some concrete facts showing they oppose legal immigration.
I would like to hear views from someone who is neutral.
If I recall Birthright citizenship was only being opposed for those who were not legally in the US. But as someone said this will be a very tough change to achieve anyway.
I am all for both parties working together, doing what is better for the country, rather than passing Bills in 1 week that no one knows the contents of.
I really want to see some concrete facts showing they oppose legal immigration.
hot tattoo on his manly parts
GlobalCitizen
08-21 03:20 PM
I think you're okay. Hopefully USCIS made a note in their system when your application was first sent and you just needed to correct something. Did you ask your lawyer what he thinks will happen?
My case was filed by a human resource person not a lawer. Human resource thinks I am ok but I do not think they really know the law. I am so scared...I do not know what to do. Ohhhh God..Life...
My case was filed by a human resource person not a lawer. Human resource thinks I am ok but I do not think they really know the law. I am so scared...I do not know what to do. Ohhhh God..Life...
more...
house I paste the stick on tattoo
GlobalCitizen
08-22 08:36 AM
What number Would I call? 1-800-375-5283 is just messages
Could anybody please provide me with a number I can call and talk to a person? Thank you much.
Could anybody please provide me with a number I can call and talk to a person? Thank you much.
tattoo Viking tattoos-manly and
Steven-T
February 23rd, 2004, 07:33 AM
So close, So close
Scott, here's goes the B&H 10 rated used 10D and 1Ds again. Why B&H have to sell this at such a premium of $6,030 above that of Adorama's $5,200? Are they supposed to be married couples, or, at least civil union?
Steven
Scott, here's goes the B&H 10 rated used 10D and 1Ds again. Why B&H have to sell this at such a premium of $6,030 above that of Adorama's $5,200? Are they supposed to be married couples, or, at least civil union?
Steven
more...
pictures Tattoos
waiting4gc02
11-15 03:30 PM
Guys:
I am currently working through a Consulting company at a client location.
Now, if I were to join the "same" client location as an employee after the 180 day completion of having filed I-485, what are the things that I need to keep in touch before I make this transition.
I do have EAD that is valid till Sep'08. Do I need to tell the client company that my I-485 is pending and that I can work using EAD or should I apply as anyone who would apply for the position without any strings...!!!
I would really appreciate if you guys can let me know any nuiances that I need to be aware of and any caveats that exist in this situation.
I appreciate your time and good luck to all to get the GC as soon as possible.
Thanks
I am currently working through a Consulting company at a client location.
Now, if I were to join the "same" client location as an employee after the 180 day completion of having filed I-485, what are the things that I need to keep in touch before I make this transition.
I do have EAD that is valid till Sep'08. Do I need to tell the client company that my I-485 is pending and that I can work using EAD or should I apply as anyone who would apply for the position without any strings...!!!
I would really appreciate if you guys can let me know any nuiances that I need to be aware of and any caveats that exist in this situation.
I appreciate your time and good luck to all to get the GC as soon as possible.
Thanks
dresses sure can get it tattooed!
freedom1
01-24 12:37 PM
I turned out to be my I-485 approval notice!
I just received it yesterday.
Thanks all.
Freedom1.
I just received it yesterday.
Thanks all.
Freedom1.
more...
makeup get geeky tattoos.
whitecollarslave
02-10 01:05 PM
All the tactics used by groups opposing EB immigration and in particular H-1B visas center around one central theme - foreign (H-1B) workers are cheap labor. While they may have identified specific cases, it is not representative of the entire EB (and H-1B) community. Most of us are paid much more than higher end of prevailing wage, plus 10-20K in immigration costs. Many of us are physicians with NIW and working in medically under served areas.
How about we stand in silent, peaceful protest against the H-1B ban to show that the common perception of H-1B workers is not all correct. I suggest we do this either in front of the Capitol on the day when the House-Senate joint committee is considering the bill or on the day when President Obama signs the bill in front of the White House. Our goal will be simple - we will try to pass on one message - We are not cheap labor. The way we do this -
Each of us will create a poster with our 2008 W-2 blown up that shows the income (100k+), show that we are paying all taxes (Medicare, SS, etc.). We can scratch off employer name, address, etc.
We can wear white strips around our lips to symbolize our protest to be silent, peaceful.
We can have some flyers ready with relevant information.
These are just some preliminary ideas. I am sure others here will have much better ideas to get our point across - We are not cheap labor.
I know skeptics and nay sayers tell me that this is useless, etc. etc. I have two things to day about that - First, if we don't do anything we don't gain anything anyways. Second, I do not expect the Congress to change anything just based on any protest like this. What this will do is that it will plant a seed of a forgotten concept that foreign workers like you and me are not cheap. I feel confident that we can find somebody to report this.
Anybody up for it? Even if 10 of us are ready I think we should do it. Timing this right is important. We have to move swiftly.
How about we stand in silent, peaceful protest against the H-1B ban to show that the common perception of H-1B workers is not all correct. I suggest we do this either in front of the Capitol on the day when the House-Senate joint committee is considering the bill or on the day when President Obama signs the bill in front of the White House. Our goal will be simple - we will try to pass on one message - We are not cheap labor. The way we do this -
Each of us will create a poster with our 2008 W-2 blown up that shows the income (100k+), show that we are paying all taxes (Medicare, SS, etc.). We can scratch off employer name, address, etc.
We can wear white strips around our lips to symbolize our protest to be silent, peaceful.
We can have some flyers ready with relevant information.
These are just some preliminary ideas. I am sure others here will have much better ideas to get our point across - We are not cheap labor.
I know skeptics and nay sayers tell me that this is useless, etc. etc. I have two things to day about that - First, if we don't do anything we don't gain anything anyways. Second, I do not expect the Congress to change anything just based on any protest like this. What this will do is that it will plant a seed of a forgotten concept that foreign workers like you and me are not cheap. I feel confident that we can find somebody to report this.
Anybody up for it? Even if 10 of us are ready I think we should do it. Timing this right is important. We have to move swiftly.
girlfriend ronnie of jersey shore tattoo.
greenmonster
11-23 10:50 AM
Hi,
I am on EAD with my GC sponsor, 485 pending - PD Dec2006. I was a Sr.QA Analyst while my Labor was filed. Those job responsibilities were submitted in labor along with generic titles like programmer analyst etc.
Now that I have planned a technology change, I am moving into SAP BI. As it is getting tough to get contract positions and lot of FTE opportunities. I am wondering what my options are. Having said that I am also anticipating my PD to be current in july/aug/sep 2011.
I was told by my employer that I could temporarily resign , take a FT with another company and join back within 6 months.
During this time they would continue with my green process.
In this situation while I am very close ( 6-9 months) for my PD to be current, what are my best options?
1. AC21 - get it all done with new company ? Job title from Sr.Qa to SAP BI would it be a problem?
2. Temporary resignation and rejoining - is it really feasible?
3. Stay with current company - try for contract positions even if it means that I have to stay long on bench. I have been already out since Aug.
Please pour in your thoughts.
Thanks for your help.
I am on EAD with my GC sponsor, 485 pending - PD Dec2006. I was a Sr.QA Analyst while my Labor was filed. Those job responsibilities were submitted in labor along with generic titles like programmer analyst etc.
Now that I have planned a technology change, I am moving into SAP BI. As it is getting tough to get contract positions and lot of FTE opportunities. I am wondering what my options are. Having said that I am also anticipating my PD to be current in july/aug/sep 2011.
I was told by my employer that I could temporarily resign , take a FT with another company and join back within 6 months.
During this time they would continue with my green process.
In this situation while I am very close ( 6-9 months) for my PD to be current, what are my best options?
1. AC21 - get it all done with new company ? Job title from Sr.Qa to SAP BI would it be a problem?
2. Temporary resignation and rejoining - is it really feasible?
3. Stay with current company - try for contract positions even if it means that I have to stay long on bench. I have been already out since Aug.
Please pour in your thoughts.
Thanks for your help.
hairstyles Lol, credit for awesome
Norristown
10-15 11:49 AM
Also carry the proof (H1b receipt notice) that your H1b is applied waiting for the approval and letter from your employer that they have applied for H1 extension.
koti
10-29 01:03 AM
Thanks for all your suggestions guys.
Looks like I can not file the new one in EB2 as long as I'm with the current employer as the masters degree completed after joining the current employer. I would have to look for a different employer in case I need to file a new one again.
Looks like I can not file the new one in EB2 as long as I'm with the current employer as the masters degree completed after joining the current employer. I would have to look for a different employer in case I need to file a new one again.
logiclife
06-15 12:07 PM
How 'bout: Not filing because LCA is rotting in the basement of a BEC?
I have edited the poll to add that option. Literally.
I have edited the poll to add that option. Literally.
No comments:
Post a Comment